Kebul na Masana'antar Mai/Gas
TS EN 50288-7 RE-2X(st)H Babban Ayyukan Mai da Gas Cable
Mai Gudanarwa: Bare Annealed Copper
Insulation: XLPE (Cross-Linked Polyethylene)
Gabaɗaya Allon: Al/PET (Aluminium/Polyester Tef)
Magudanar Waya: Tinned Copper
Sheath: LSZH (Ƙaramar Hayaki Zero Halogen)
Ƙarfin wutar lantarki: 500V
Zazzabi mai ƙima: -20 ~ + 70 ℃
A'A. NA | NOMINAL croSS SASHEN YANKI | NOMINAL DIAMETER |
1 P | 0.5 | 4.6 |
1 P | 0.75 | 4.6 |
1 P | 1 | 5 |
1 P | 1.5 | 6.4 |
1T | 0.5 | 4.8 |
1T | 0.75 | 5.4 |
1T | 1 | 5.3 |
1T | 1.5 | 6.7 |
2P (Q) | 0.5 | 6.7 |
2P (Q) | 0.75 | 7.6 |
2P (Q) | 1 | 7.5 |
2P (Q) | 1.5 | 9.7 |
5P | 0.5 | 8.6 |
5P | 0.75 | 9.8 |
5P | 1 | 9.5 |
5P | 1.5 | 12.6 |
10P | 0.5 | 11.9 |
10P | 0.75 | 13.7 |
10P | 1 | 13.4 |
10P | 1.5 | 17.9 |
15P | 0.5 | 13.8 |
15P | 0.75 | 15.9 |
15P | 1 | 15.5 |
15P | 1.5 | 20.8 |
20P | 0.5 | 15.5 |
20P | 0.75 | 17.9 |
20P | 1 | 17.4 |
20P | 1.5 | 23.5 |
Dangane da ma'aunin EN 50288-7, 2X yana nufin rufin XLPE, (st) yana tsaye don allo na gama kai kuma Y yana nufin PVC Flame Retardant jaket kayan aiki na USB.
Aikace-aikace
XLPE kebul marasa ɗamara ana amfani da su sosai don shigarwa na cikin gida a cikin jika da wuraren ɗanɗano. Yawanci ana amfani dashi don sadarwa a masana'antar sarrafa masana'antu,
bayanai da sigina da sabis na watsa murya.
Matsayi
Zane dangane da daidaitattun BS EN 50288-7 (tsohuwar ma'aunin BS 5308).
Ayyukan wuta
TS EN 60332-1-2 Dagewar wuta
Ƙimar Wutar Lantarki
300V, 500V
Gina igiyoyi
Mai gudanarwa: Wayar jan karfe mai rufi ko ƙarfe, mai ƙarfi, madauri ko sassauƙa, mai dacewa da IEC 60228 Classes 1, 2 da 5.
Insulation: Extruded XLPE fili bisa ga EN 50290-2-29. PVC, PE, PP mahadi suna samuwa azaman zaɓuɓɓuka.
Gabaɗaya garkuwa: Tef ɗin Aluminium/Polyester akan madaidaicin tushe, gefen ƙarfe ƙasa, tare da tinned waya magudanar ruwa, 0.5 mm². Akwai shi tare da garkuwar rigar tagulla ko
Aluminium/polyster tef a haɗe tare da kariyar garkuwar jan karfe.
Sheath: Filin PVC na thermoplastic bisa ga EN 50290-2-22
Zaɓuɓɓukan Sheath: resistant UV, hydrocarbon resistant, mai resistant, rodent resistant da termite resistant azaman zaɓuɓɓuka. Yarda da Juriya na Wuta
Yarda da ka'idodin aikin wuta (IEC 60332-1, IEC 60332-3, UL 1581, UL 1666, da dai sauransu) ya dogara da ma'aunin oxygen na fili na PVC da kuma ƙirar kebul gabaɗaya.
Hakanan ana samun LSPVC akan buƙata.
Rubutun launi
Launi mai rufi: launi da/ko ƙarin alamun zobe da/ko alamomin da aka samu ta hanyar amfani da rufin launi ko ta fitattun filaye, bugu ko fenti masu launi.
Sheath : Baƙar fata, sauran launuka akwai akan buƙata.
Jiki da kuma thermal Properties
Yanayin zafin jiki yayin aiki: -30 ° C - + 90 ° C
Yanayin zafin jiki yayin gyarawa: -5°C - +50°C
Matsakaicin zafin jiki na gajeren lokaci (5 seconds): 250°C
Mafi ƙarancin lanƙwasawa radius: 7.5 x OD
Aikace-aikace:
Kafaffen shigarwa don iko, sarrafawa da haske a wurare masu aminci, gaggawa da aikace-aikacen kan teku ko na ketare
inda ake buƙata don damuwa na inji.
