Cable ea Indasteri ea Oli / Khase
EN50288-7 RE-2X(st)H SWAH Sesebelisoa sa Lisebelisoa
Mokhanni: Bare Annealed Copper
Insulation: XLPE (Polyethylene e Khokahaneng ka Phapang)
Kakaretso ea skrine: Al/PET (Aluminium/Polyester Tape)
Mohala oa metsi: Koporo e Tinngoeng
Inner Sheath: LSZH (Low Smoke Zero Halogen)
Lihlomo: SWA (Lithapo tsa tšepe tse nang le galvanized)
Kantle Sheath: LSZH (Low Smoke Zero Halogen)
Matla a lekantsoeng: 500V
E lekantsoe Mocheso: -20 ~+70℃
NO. TSA | LEBITSO SEPAPANO SEBAKA | LEBITSO KAKARETSO DIAMETER |
1 P | 0.5 | 9 |
1 P | 0.75 | 9.5 |
1 P | 1 | 9.4 |
1 P | 1.5 | 10.8 |
1T | 0.5 | 9.2 |
1T | 0.75 | 9.8 |
1T | 1 | 9.7 |
1T | 1.5 | 11.3 |
2P(Q) | 0.5 | 11.2 |
2P(Q) | 0.75 | 12.2 |
2P(Q) | 1 | 12 |
2P(Q) | 1.5 | 14.4 |
5P | 0.5 | 13.1 |
5P | 0.75 | 14.4 |
5P | 1 | 14.2 |
5P | 1.5 | 17.4 |
10P | 0.5 | 16.7 |
10P | 0.75 | 18.6 |
10P | 1 | 18.2 |
10P | 1.5 | 23.7 |
15P | 0.5 | 11.3 |
15P | 0.75 | 21.5 |
15P | 1 | mashome a mabeli a motso o le mong |
15P | 1.5 | 27.5 |
20P | 0.5 | 21.1 |
20P | 0.75 | 23.7 |
20P | 1 | 23.1 |
20P | 1.5 | 30.4 |
2X e emetse XLPE insulation H e bolela Halogen mahala ka baki e ka hare le baki ea kantle, SWA galvanized steel wire Armor, ST e bolela skrini se kopaneng hangata re ka se utloisisa e le AL/pet tape plus drain terata.
Kopo le tlhaloso
Lithapo tsa lisebelisoa ho latela BS EN 50288-7 li sebelisoa bakeng sa phetisetso ea matšoao a analog le dijithale litsamaisong tsa taolo ea lisebelisoa mme li arotsoe ho latela IEC 79-14 bakeng sa ho sebelisoa tikolohong ea Sehlopha sa II, Zone 1 le 2, 'me ha lia lokela ho hokahanngoa. ka kotloloho ho phepelo ea motlakase e sa sebetseng hantle, mohlala, liteishene tsa phepelo ea motlakase oa sechaba.
E khothalelitsoe ho kenya ka tlung le kantle, masakaneng, literei, liphaephe, libaka tse metsi le tse omeletseng, tse sa khothaletsoang ho patoa ka kotloloho.
E khothalletsoa hore e sebelisoe mehatong ea tšireletso ea mollo bakeng sa bophelo le thepa ea bohlokoa ea thepa.
Litšobotsi tsa ho hanyetsa Mollo
Thepa e thibelang malakabe (teko ea lelakabe le emeng ka thapo e le 'ngoe) EN 60332-1-2; IEC 60332-1-2; BS EN 60332-1-2; VDE 0482-332-1; NBN C 30-004 (katse. F1); NF C32-070-2.1(C2); CEI 20-35/1-2; EN 50265-2-1 *; din vde 0482-265-2-1*
Rated Voltage
300/500V
Kaho ea Cable
Mokhanni oa IEC 60228 Mofuta oa 2 oa li-conductor tse ngata tse kentsoeng koporo.
Insulation Extruded XLPE motsoako oa motsoako ho latela EN 50290-2-29.
Li-cores tse 2 tse kopantsoeng li kopantsoe hammoho ho etsa para.
Lithapo tse sothehileng tsa lithapo li sotheha ho ba mekato e nang le sebaka se lekaneng.
Theipi e phuthelang PETP
Tšireletso e akaretsang Thebe ea theipi ea Aluminium/polyester e nang le terata e entsoeng ka koporo e 0.5 mm².
Inner sheath LSZH motsoako ho latela EN 50290-2-27.
Armouring terata e entsoeng ka Galvanized.
Outer sheath EN 50290-2-27 e tloaelehileng LSZH motsoako. UV, hydrocarbon, oli, litoeba le thepa ea mohloa ke khetho.
Mmala
Insulation: e ntšo / e tšoeu, lipara tsa likhoele li khetholloa ka tatellano ka linomoro (1, 2,,,) ho li-cores tse tšoeu.
Sheath: e ntšo kapa e putsoa (litsamaiso tse sireletsehileng tsa kahare)
Litšobotsi tsa 'mele
Boemo ba mocheso o sebetsang (boemo bo emeng) -30°C - +90°C
Mocheso oa ho kenya mocheso (o ntse o tsamaea) -5°C - +50°C
Bonyane ba kobeha radius 10 X bophara ba kantle
Karolo ea 1200 e hanyetsanang le UV UL 1581
Ho hanyetsa Oli
ICEA S-73-532 (E lekoa ho + 60 ° C bakeng sa lihora tsa 4. Matla a fokolang a fokolang le ho lelefatsa ha 60% ho bolokiloe nakong ea lihora tsa 4).
