OEM & ODM

Publicly Available Standard (PAS) BS 5308 cables are designed
to carry communication and control signals in a variety of
installation types including those found in the petrochemical
industry. The signals can be analogue, data or voice type and from
a variety of transducers such as pressure, proximity and
microphone. Part 1 Type 1 cables are generally designed for
indoor use and in environments where mechanical protection is
not required. Suitable for fire resistant installations. Individually
screened for enhanced signal security.

Publicly Available Standard (PAS) BS 5308 cables are designed
to carry communication and control signals in a variety of
installation types including those found in the petrochemical
industry. The signals can be analogue, data or voice type and from
a variety of transducers such as pressure, proximity or
microphone. Part 1 Type 1 cables are generally designed for
indoor use and in environments where mechanical protection is
not required. Suitable for fire resistant installations. Individually
screened for enhanced signal security.

Publicly Available Standard (PAS) BS 5308 cables are designed
to carry communication and control signals in a variety of
installation types including those found in the petrochemical
industry. The signals can be analogue, data or voice type and from
a variety of transducers such as pressure, proximity or
microphone. Part 1 Type 1 cables are generally designed for
indoor use and in environments where mechanical protection is
not required. Suitable for fire resistant installations. Individually
screened for enhanced signal security.

Publicly Available Standard (PAS) BS 5308 cables are designed
to carry communication and control signals in a variety of
installation types including those found in the petrochemical
industry. The signals can be of analogue, data or voice type and
from a variety of transducers such as pressure, proximity or
microphone. Part 1 Type 1 cables are generally designed for
indoor use and in environments where mechanical protection is
not required. Overall and individually screened pairs are
available within the range where further signal security is
required.

Publicly Available Standard (PAS) BS 5308 cables are designed
to carry communication and control signals in a variety of
installation types including those found in the petrochemical
industry. The signals can be of analogue, data or voice types and
from a variety of transducers such as pressure, proximity or
microphone. Part 1 Type 1 cables are generally designed for
indoor use and in environments where mechanical protection is
not required. Suitable for fire resistant installations.

PAS (publicly available standard) BS 5308 cables are
designed to carry communication and control signals in a
variety of installation types including those found in the
petrochemical industry. The signals can be of analogue, data or
voice type and from a variety of transducers such as pressure,
proximity or microphone. Part 1 Type 1 cables are generally
designed for indoor use and in environments where
mechanical protection is not required. Overall and individually
screened pairs are available within the range where further
signal security is required.

Publicly Available Standard (PAS) BS 5308 cables are designed
to carry communication and control signals in a variety of
installation types including those found in the petrochemical
industry. The signals can be of analogue, data or voice type and
from a variety of transducers such as pressure, proximity or
microphone. Individually screened for enhanced signal security.
Part 1 Type 1 cables are generally designed for indoor use and in
environments where mechanical protection is not required.

Publicly Available Standard (PAS) BS 5308 cables are designed
to carry communication and control signals in a variety of
installation types including those found in the petrochemical
industry. The signals can be of analogue, data or voice type and
from a variety of transducers such as pressure, proximity or
microphone. Part 1 Type 1 cables are generally designed for
indoor use and in environments where mechanical protection is
not required.

Thermocouple extension cable is a thermocouple cable which is
identified by the letter X (e.g. for type T cable TX). Extension
grade wire is only used to extend a thermocouple signal from a
probe back to the instrument reading the signal. These cables are
used with thermocouples for temperature measurements where
hydrocarbon may be present.

Thermocouple extension cable is a thermocouple cable which is
identified by the letter X (e.g. for type T cable TX). Extension
grade wire is only used to extend a thermocouple signal from a
probe back to the instrument reading the signal. These cables are
used with thermocouples for temperature measurements where
hydrocarbon may be present.

Thermocouple extension cable is a thermocouple cable which is
identified by the letter X (e.g. for type E cable EX). Extension
grade wire is only used to extend a thermocouple signal from a
probe back to the instrument reading the signal. These cables are
used with thermocouples for temperature measurements where
hydrocarbon may be present.

Thermocouple extension cable is a thermocouple cable which
is identified by the letter X (e.g. for type K cable KX). Extension
grade wire is only used to extend a thermocouple signal from a
probe back to the instrument reading the signal. These cables
are used with thermocouples for temperature measurements
where hydrocarbon may be present.

Conductor: 24AWG Solid Bare Copper

Pairs: 4 pairs

Insulation: 0.91±0.05mm HDPE

Rip Cord: Cotton or Fiber

Outer Jacket: PE, LSZH PVC

Conductor: 0.57±0.005mm

Pairs: 4 pairs

Insulation: 1.02±0.05mm HDPE

Cross Section: Modified Polyethylene

Shield 1: PET Foil

Drain Wire: Tinned Copper 0.4mm

Shield 2: Al/ PET Foil, Foil Faced out

Rip Cord: Cotton or Fiber

Outer Jacket: PE, LSZH PVC

Application: it is primarily intended for general application.

Application: Power supply and signal transmission, indoors or outdoors even wet environment. For fixed laying in free air, in pipe or conduit, on masonry and metal structures or suspended. In places where in case of fire people are exposed to serious risks due to the emission of smoke, toxic and corrosive gases and where you want to avoid damage to facilities, equipment, goods. Suitable for feeding of: emergency exits, alarm signals, warning of smoke or gas, escalators. Suitable for laying underground direct or indirect.

Braidless silicone motor lead wire, consists of a single, stranded, tinned or nickel plated copper conductor with a silicone rubber insulation.

Application: Designed for use in a wide range of high-temperature applications, such as motors, lighting fixtures, clothes dryers, stoves, and therapeutic and electronic devices.

Application: The heating cable units are versatile and can be used in many applications. They are ideal for comfort heating in concrete floor constructions, and suitable for storage heating, snow melting installations, for frost protection of roof and gutters, frost protection of pipes, soil heating and other frost protection applications.