PAS/BS 5308 Part 1 Type 1 SIL/IS/OS/LSZH (Fire Resistant)
Publicly Available Standard (PAS) BS 5308 cables are designed
to carry communication and control signals in a variety of
installation types including those found in the petrochemical
industry. The signals can be analogue, data or voice type and from
a variety of transducers such as pressure, proximity and
microphone. Part 1 Type 1 cables are generally designed for
indoor use and in environments where mechanical protection is
not required. Suitable for fire resistant installations. Individually
screened for enhanced signal security.
PAS BS 5308 Part 1 Type 1 SIL/OS/LSZH (Fire Resistant)
Publicly Available Standard (PAS) BS 5308 cables are designed
to carry communication and control signals in a variety of
installation types including those found in the petrochemical
industry. The signals can be analogue, data or voice type and from
a variety of transducers such as pressure, proximity or
microphone. Part 1 Type 1 cables are generally designed for
indoor use and in environments where mechanical protection is
not required. Suitable for fire resistant installations. Individually
screened for enhanced signal security.
PAS BS 5308 Part 1 Type 1 MICA/XLPE/IS/OS/LSZH (Fire Resistant)
Publicly Available Standard (PAS) BS 5308 cables are designed
to carry communication and control signals in a variety of
installation types including those found in the petrochemical
industry. The signals can be analogue, data or voice type and from
a variety of transducers such as pressure, proximity or
microphone. Part 1 Type 1 cables are generally designed for
indoor use and in environments where mechanical protection is
not required. Suitable for fire resistant installations. Individually
screened for enhanced signal security.
PAS BS 5308 Part 1 Type 1 XLPE/IS/OS/LSZH
Publicly Available Standard (PAS) BS 5308 cables are designed
to carry communication and control signals in a variety of
installation types including those found in the petrochemical
industry. The signals can be of analogue, data or voice type and
from a variety of transducers such as pressure, proximity or
microphone. Part 1 Type 1 cables are generally designed for
indoor use and in environments where mechanical protection is
not required. Overall and individually screened pairs are
available within the range where further signal security is
required.
PAS BS 5308 Part 1 Type 1 MICA/XLPE/OS/LSZH (Fire Resistant)
Publicly Available Standard (PAS) BS 5308 cables are designed
to carry communication and control signals in a variety of
installation types including those found in the petrochemical
industry. The signals can be of analogue, data or voice types and
from a variety of transducers such as pressure, proximity or
microphone. Part 1 Type 1 cables are generally designed for
indoor use and in environments where mechanical protection is
not required. Suitable for fire resistant installations.
PAS/BS 5308 Part 1 Type 1 XLPE/OS/LSZH Cable
PAS (publicly available standard) BS 5308 cables are
designed to carry communication and control signals in a
variety of installation types including those found in the
petrochemical industry. The signals can be of analogue, data or
voice type and from a variety of transducers such as pressure,
proximity or microphone. Part 1 Type 1 cables are generally
designed for indoor use and in environments where
mechanical protection is not required. Overall and individually
screened pairs are available within the range where further
signal security is required.
PAS BS 5308 Part 1 Type 1 PE/IS/OS/PVC Cable
Publicly Available Standard (PAS) BS 5308 cables are designed
to carry communication and control signals in a variety of
installation types including those found in the petrochemical
industry. The signals can be of analogue, data or voice type and
from a variety of transducers such as pressure, proximity or
microphone. Individually screened for enhanced signal security.
Part 1 Type 1 cables are generally designed for indoor use and in
environments where mechanical protection is not required.
PAS BS 5308 Part 1 Type 1 PE/OS/PVC Cable
Publicly Available Standard (PAS) BS 5308 cables are designed
to carry communication and control signals in a variety of
installation types including those found in the petrochemical
industry. The signals can be of analogue, data or voice type and
from a variety of transducers such as pressure, proximity or
microphone. Part 1 Type 1 cables are generally designed for
indoor use and in environments where mechanical protection is
not required.
Thermocouple TX IS OS Armoured Extension Cable
Thermocouple extension cable is a thermocouple cable which is
identified by the letter X (e.g. for type T cable TX). Extension
grade wire is only used to extend a thermocouple signal from a
probe back to the instrument reading the signal. These cables are
used with thermocouples for temperature measurements where
hydrocarbon may be present.
Thermocouple TX Overall Screen Armoured Cable
Thermocouple extension cable is a thermocouple cable which is
identified by the letter X (e.g. for type T cable TX). Extension
grade wire is only used to extend a thermocouple signal from a
probe back to the instrument reading the signal. These cables are
used with thermocouples for temperature measurements where
hydrocarbon may be present.
Thermocouple EX IS OS Extension 250V Cable
Thermocouple extension cable is a thermocouple cable which is
identified by the letter X (e.g. for type E cable EX). Extension
grade wire is only used to extend a thermocouple signal from a
probe back to the instrument reading the signal. These cables are
used with thermocouples for temperature measurements where
hydrocarbon may be present.
Thermocouple KX Extension Overall Screen 250V Cable
Thermocouple extension cable is a thermocouple cable which
is identified by the letter X (e.g. for type K cable KX). Extension
grade wire is only used to extend a thermocouple signal from a
probe back to the instrument reading the signal. These cables
are used with thermocouples for temperature measurements
where hydrocarbon may be present.
Thermocouple Extension Cable
Thermocouple extension cable is a thermocouple cable which
is identified by the letter X (e.g. for type K cable KX). Extension
grade wire is only used to extend a thermocouple signal from a
probe back to the instrument reading the signal.
SiF Silicone 180 Cable
This cable can be used for operation in ambient temperatures
above 55 °C, for internal wiring of lamps, heating equipment
and electrical appliances as well as for switching boxes and
distribution boards.
SiHFC Silicone 180 Cable
This cable is used for connection of mobile electrical
appliances without mechanical stress at increased ambient
temperatures, for example in steelworks, but also at low
temperatures. Insulation and sheath are resistant to most
oils, greases, acids, lyes and oxidants. For fixed installation in
mechanical protected conduits. The cable is designed for use
in EMCsensitive applications.
SiHF-J Silicone 180 Cable
This cable is used for connection of electrical appliances
without mechanical stress at increased environmental
temperatures, for example in steelworks, but also at low
temperatures. Insulation and sheath are resistant to most oils,
acids, lyes and oxidants.